Operation Manual

ManualsBrandsTrekstor ManualsAudioi beat censo 2gb

– 8 –

– 9 –

Change track•

Briefly press the

H button to select the next song. If you press the G button within 5 seconds after a

song starts, you switch to the prior song. If you push the

G button after a playback starts and after at

least 5 seconds, the i.Beat censo returns to the beginning of the current title.

Rewind/fast-forward within a track•

You can navigate within the current song by holding down the

G or H button. Hold down the H

G button to fast-forward or rewind.

Note: The longer you hold down the

H or G button, the faster you fast-forward or rewind.

Increase/lower volume•

Briefly press the

a or b button to raise or lower the volume.

Note: If you hold down the

a or b button, the volume changes gradually.

Mode: Folder navigation

Switch to "f

o l d e r " mode.

Press the

H or G button to select the next or previous file. To play the selected file, press the A button.

To change to a subfolder, press the

A button if the folder is marked. To return to the main directory, briefly

press the

i button. To leave folder navigation, press the i button when you are in the Main Directory.

Deleting a file•

Select the file you want to delete using folder navigation, and briefly press the

% button. To

confirm that you want to delete the file, switch to "y

e s " by pressing the G or H button, and then

press the

A button.

Mode: FM radio (optional)

Switch to the "fM

r A d i o " mode.

Note: Always connect your earphone or headphone to the headphone jack of the i.Beat censo FM since the

earphone/headphone cable serves as an antenna for the internal radio.

To call up the FM radio menu press the

i button for approximately 1 second. Select the desired menu

item by pressing the

G or H button and confirm by pressing the A button. Briefly press the i

button to exit the FM radio menu.

Switching between manual station selection and memory mode•

In the FM radio menu you can switch between memory mode "s

t A t i o n " and manual station selection

c A n ". Select the desired mode by pressing the G or H button and confirm by pressing the A button.

Automatic memory assignment / automatic station scan•

To start the automatic station scan, select "A

U t o s c A n " in the FM radio menu and confirm the subsequent

query by selecting "y

e s " with the A button. The i.Beat censo FM now automatically searches for the

radio stations with the strongest reception and saves them in 20 memory locations.

Switching between saved stations•

In memory mode "s

t A t i o n ", you can switch between the existing memory locations by briefly pressing

the

G or H button.

Manual frequency change / manual scan•

In manual station selection mode "s

c A n ", briefly press the G or H button to change the reception

frequency by 0.1 MHz. Hold down the

G or H button for the i.Beat censo FM to automatically scan

the upper and lower frequencies for stations with strong reception.