Operating Instructions

– 14 –

• Rewind / fast-forward within a song

You can navigate within the current song by holding down the  or  button. Hold down

the  or  button to fast forward or rewind.

Note: The longer you hold down the  or  button, the faster you fast-forward or rewind.

• Increase / decrease volume

Briefly press the  or  button to raise or lower the volume.

Note: If you hold down the  or  button, the volume changes gradually.

Folder navigation

You get to folder navigation in "MUSIC" mode by briefly pressing the  button. Press the  or

 button to select the next or previous file. To play the selected file, press the  button.

To change to a subfolder, press the  button if the folder is marked. To return to the main

directory, press the  button. To leave folder navigation, press the  button.

• Deleting a file

Select the file you want to delete using folder navigation, and briefly press the  button.

To confirm that you want to delete the file, switch to the delete symbol by pressing the  or

 button, and then press the  button.

Note: You cannot delete any files during playback of an audio file.

Mode: FM Radio (optional)

Switch to "FM RADIO" mode.

Note: Always connect your headphone jack 1 to the i.Beat classico

since the earphone

cable serves as an antenna for the internal radio.

• Automatic memory assignment / automatic station search

To start automatic station search, hold the  button for approximately 1 second and confirm

by pressing the  button. The i.Beat classico

now automatically searches for the

radio stations with the strongest reception and saves them in 20 memory locations.

• Switching between manual station selection and memory mode

Briefly press the  button to switch between manual station selection "P|OFF" and memory

mode "P|XX" (xx = memory location number).

• Switching between saved stations

In memory mode "P|XX" you can switch between available presets by briefly pressing the  or

 button.

• Manually change frequency / manual search

In manual station selection mode "P|OFF", briefly press the  or  button to change the

reception frequency by 0.1 MHz. Hold down the  or  button for the

i.Beat classico

to automatically scan the upper and lower frequencies for stations

with strong reception.