Operating Instructions

– 15 –

• Saving individual stations

Change to manual station selection "P|OFF". Select the desired frequency, and briefly press the

 button. Press the  or  button to select the desired memory location, and confirm

by briefly pressing the  button.

• Deleting saved stations

Briefly press the  button to display all memory locations. Then select a saved station with the

 or  button, and confirm that you want to delete it by briefly pressing the  button.

• Switching between mono and stereo

Hold the  button for approximately 2 seconds to switch between mono and stereo.

• Recording FM radio

Hold the  button for approximately 2 seconds to start recording radio. Briefly press the

 button to stop recording.

Note: All radio recordings are saved in the "RECORD" folder, sub-folder "FM" of the i.Beat classico

Mode: Microphone / Voice recording

Switch to the "MICROPHONE" mode.

You can record your voice using the integrated microphone. Briefly press the  button to start

voice recording. Briefly press the  button again to stop recording.

Note: All voice recordings are saved in the "RECORD" folder, sub-folder "VOICE" of the i.Beat classico.

Tip: You also have the option of using the integrated microphone as a standard microphone (e.g. for

Internet telephony). To do so, connect the provided line-in cable to the microphone jack of your PC. To

activate the microphone, switch to the "MICROPHONE" mode without starting voice recording.

Mode: Line-in

Please switch to the "LINE-IN" mode.

You can connect an external device to the line-in jack (such as a CD player) and directly record from it.

Briefly press the  button to start line-in recording. Briefly press the  button again to stop

recording.

Note: All line-in recordings are saved in the "RECORD" folder, sub-folder "LINE" of the i.Beat classico.