Operation Manual

EN
24
2) Connecting the TrekStor MovieStation to the computer
a
Caution: To prevent damage to your MovieStation, you must make sure you always observe the
following order when connecting the MovieStation to your computer.
a) First connect the power supply included in delivery to the "dC iN" port of the
MovieStation. Then plug the power supply into a socket.
b) After the power has been connected, connect the USB port of the MovieStation to a USB
port on your computer.
i
Only use the provided USB connection cable to connect the device to a USB port on your
computer.
c) Turn on the MovieStation by briefly pressing the on/off switch
/. Your operating system
automatically recognizes the MovieStation and adds the MovieStation as a "lO C A l d i s K " (or
"lO C A l d R i V e ") to "MY CO M P u T e R "/"CO M P u T e R " (Microsoft® Windows) or "de s K T O P " (Mac® OS X and
Linux®).
d) If you want to turn off the MovieStation, briefly press the on/off switch
/.
3) Data exchange with the TrekStor MovieStation
After successful startup of the device, a local disk called "TR e K sT O R " appears under "MY CO M P u T e R "/
"CO M P u T e R " (Windows®) or on your "de s K T O P " (Mac® OS X and Linux®). You can also access the
MovieStation like a normal hard disk.
Windows® 2000/XP/Vista
a) Select the desired files or folders with your mouse.
b) Position the mouse pointer over the selected files or folders, and press the right mouse
button. Select "C
O P Y " from the context menu that appears.
c) Under "M
Y CO M P u T e R "/"CO M P u T e R ," select the desired target (such as the "TR e K sT O R " drive).
d) Click it with your right mouse button, and select "P
A s T e " to start copying. After copying is
over, the data will be available on the MovieStation.
Mac® OS X from 10.3
Select the desired files with your mouse. Drag and drop the files in the "Fi N d e R " to the drive
symbol of your MovieStation.