Operation Manual

EN
26
Connection via the YUV adapter cable
Use the provided YUV adapter cable and connect the "YPBPR OuT" output of the
MovieStation with the video component input of your television set to transmit the
picture signal.
For the transmission of the sound signal, two possibilities are available to you:
1) Connect the optical audio output of the MovieStation to the optical audio input
of your HiFi system.
2) Connect the stereo jack of the provided audio/video adapter cable to the "AV OuT"
output of the MovieStation and the red ans white cinch plugs to the audio cinch
input of your HiFi system or your television set.
i
You can also use the SCART adapter to connect your MovieStation to a SCART port on
your television.
c) Now you can switch on your MovieStation as described in these operating instructions.
a
Caution: The MovieStation may be in a different video mode even though it is correctly
connected. This can distort the picture and color on your television. Please change the TV mode
to remedy this problem.
6) Operating the TrekStor MovieStation
You can operate your MovieStation comfortably using the remote control and the integrated
control panel.
Activation/deactivation of the MovieStation
Turn on the MovieStation by briefly pressing the on/off switch
/ on the MovieStation or
the / button on the remote control.
To turn off the MovieStation after use, briefly press the on/off switch
/ on the MovieStation
or the / button on the remote control.
Adjusting the volume
Press the
a or b button in music and video mode to raise or lower the volume.
When you press the ö button, you can turn the sound of your MovieStation on and off.
i
If you hold down the a or b button, the volume changes gradually.
Saving the current position of the title (bookmark)
During the playback of a video or music file, you can save the current position in the title
being played.
Press the "BOOKMARK" button to set a digital bookmark for the file currently being played.
To retrieve the bookmark and thus continue the playback of the file at the saved position,
press the "BOOKMARK" button in the folder navigation. This bookmark remains until a
new bookmark is set.