Operation Manual

16
8. Starting up the Primebook for the first time
First unpack your Primebook. Remove all components from the packaging and
completely remove the packaging material, including the protective ilm. Check
to ensure that the delivery is complete (see Section 5). If you ind that there are
missing or damaged components, contact customer service immediately.
Charging the Primebook
Please fully charge your Primebook before you use it for the irst time.
Connect the DC plug of the included power supply to the socket (DC IN) of the
Primebook. Then plug the power supply into an electrical outlet.
The charging LED lights up red during charging.
i
ADVICE
Only leave the power adapter connected to the power socket until the Primebook is
fully charged. Disconnect the power adapter from the socket first and then remove
the charging cable from your Primebook.
i
ADVICE
The maximum battery life is reached after approximately charging cycles.
i
ADVICE
We recommend charging the Primebook while it is switched off. This allows you
to get the maximum charging speed.
Switching on the Primebook
Press the On/off switch for about 3 seconds to switch on the Primebook.
The charging LED lights up briely and the device starts up. A coniguration
assistant appears directly after the tablet has booted up. Follow the
coniguration assistant instructions to set up your Primebook.
i
ADVICE
During the setup process, the configuration assistant will prompt you to sign in
with your Microsoft account. If you do not yet have a Microsoft account, please
set one up at this point.