Operation Manual

14
K) Status LED on/off
L) Status LED Caps Lock
M) Status LED touchpad
N) On/Off switch
O) DC IN
P) Audio port
Q) USB socket 3.1
R) Memory card slot
7. Starting up the Primebook for the first time
First unpack your Primebook. Remove all components from the packaging and
completely remove the packaging material, including the protective ilm. Check
to ensure that the delivery is complete (see Section 5). If you ind that there are
missing or damaged components, contact customer service immediately.
Charging the Primebook
Please fully charge your Primebook before you use it for the irst time.
Connect the DC plug of the included power supply to the socket (DC IN) of the
Primebook. Then plug the power supply into an electrical outlet.
i
ADVICE
Only leave the power adapter connected to the power socket until the Primebook is
fully charged. Disconnect the power adapter from the socket first and then remove
the charging cable from your Primebook.
i
ADVICE
The maximum battery life is reached after approximately charging cycles.
i
ADVICE
We recommend charging the Primebook while it is switched off. This allows you
to get the maximum charging speed.