Operation Manual
26
19. Transferring files between the Primebook and other
devices
Transferring files via Bluetooth
a) Enable the Bluetooth function on the device you want to connect and make
the device visible to other devices if necessary. To do so, refer to the operating
instructions of the device to be connected.
b) Call up the settings (see Section 14).
c) In Settings, tap "Devices" and in the following window click "Bluetooth &
other devices" on the left.
d) Drag the Bluetooth slider (in the centre of the screen) with from left
to right. The word "On" appears next to the slider. This activates the
Primebook Bluetooth function.
e) Tap "Add Bluetooth or other device" and than choose "Bluetooth".
The Primebook searches for available devices nearby.
f) Select the device you want to connect from the list of devices available by
clicking on the name of the device.
g) The Primebook sends a veriication code to the device to be connected.
Check that the code displayed on the device to be connected matches the
code displayed on the Primebook and conirm on the notebook by tapping "Yes".
i
ADVICE
You may also have to confirm the pairing procedure on the device to be
connected.
h) The status message "Paired" appears after successful pairing. Close this
window by clicking on "Close".
i) Exit the device settings by closing the window. To do this, click the "x"
symbol at the top right of the display.
j) Open the ile browser by clicking the folder symbol on the task bar and go
to the ile that you would like to send.
k) Click the right mouse button, the context menu opens.
l) Click "Send to" on the context menu and then tap "Bluetooth device". A
list of all paired Bluetooth devices appears.
m) Click the required device and conirm with "Next". The notebook now
sends the selected ile to the required device.
n) You may have to conirm receipt of the ile on the destination device.