User manual
Table Of Contents
- 1) About the SurfTab
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and ports
- 6) Starting up the SurfTab for the first time
- 7) Using the keyboard
- 8) Action Center
- 9) Accessing and using the Start menu
- 10) Accessing Settings
- 11) Connecting the SurfTab to the Internet
- 12) Downloading applications from the Windows Store
- 13) Transferring files between the SurfTab and other devices
- 14) Connecting the SurfTab to a television
- 15) Reset
- 16) Switching off the SurfTab
- 17) Notes on copyright and trademarks
- 18) Notes on disposal
- 19) Notes on liability and warranty
EN
24
13) Transferring files between the SurfTab and other devices
Transferring files via Bluetooth
a) Activate the Bluetooth function on the device you want to connect, and
allow the device to become visible to other devices if necessary. To do so,
refer to the operating instructions of the device to be connected.
b) Go to Settings (see Section 10).
c) In Settings, tap "
DeviCes", and in the following window tap "Bluetooth" on the left.
d) Move the Bluetooth slider (in the middle of the screen) from left to right.
The word "
on" now appears next to the slider. This activates the SurfTab
Bluetooth function and the SurfTab searches for available devices nearby.
e) Select the device you would like to connect from the list of devices available
by tapping the name of the device. Then tap "
pAir".
f) The SurfTab sends a verification code to the device to be connected. Check
that the code displayed on the device to be connected matches the code
displayed on the SurfTab and confirm with "
Yes" on the SurfTab.
i
You may also have to confirm the pairing procedure on the device to be
connected.
g) The status message "
ConneCteD" appears under the selected device after
successful pairing.
h) Exit the device settings by closing the window.
i) Open the SurfTab file browser (folder icon on the taskbar) and go to the file
that you would like to send.
j) Tap the file you want to send and hold it for approximately 1 second, then
release. The Context menu appears. Select the "
senDen to" option and then
tap "Bluetooth DeviCe". A list of all paired Bluetooth devices appears.
k) Tap the desired device and confirm with "
next".
The SurfTab now sends the selected file to the desired device.
l) You may also have to confirm receipt of the file on the destination device.
i
After a successful file transfer, deactivate the Bluetooth function on the SurfTab
(and on your destination device) to save energy.