User manual
Table Of Contents
- 1) About the SurfTab
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and ports
- 6) Starting up the SurfTab for the first time
- 7) Using the keyboard
- 8) Action Center
- 9) Accessing and using the Start menu
- 10) Accessing Settings
- 11) Connecting the SurfTab to the Internet
- 12) Downloading applications from the Windows Store
- 13) Transferring files between the SurfTab and other devices
- 14) Connecting the SurfTab to a television
- 15) Reset
- 16) Switching off the SurfTab
- 17) Notes on copyright and trademarks
- 18) Notes on disposal
- 19) Notes on liability and warranty
EN
26
14) Connecting the SurfTab to a television
You can transfer the image and sound from the SurfTab to a suitable television
via HDMI cable or Miracast.
Connecting to a television via HDMI cable
To connect the SurfTab to a suitable television via HDMI, you require an appropriate
cable (Micro-HDMI to HDMI, available in specialist shops). Connect the SurfTab
and the television using the cable and, on the television, select the correct HDMI
input as the source (the HDMI input to which the cable is connected).
The television now shows the display of your SurfTab.
Connecting to a television via Miracast
Miracast technology is a peer-to-peer standard for image transfer.
The SurfTab supports this standard and enables wireless transfer of image
and sound from the SurfTab to a WiFi and Miracast-enabled television device.
i
The SurfTab can connect to your television via Miracast only if the television also
supports Miracast technology. Please check with your television manufacturer if
necessary.
Proceed as follows to connect your SurfTab to a Miracast-enabled television:
a) First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (consult your television’s operating
instructions for details).
b) Go to Settings (see Section 10).
c) In Settings, tap "
DeviCes", and in the following window tap "ConneCteD DeviCes"
on the left.
d) Next tap "
ADD A DeviCe" in the top centre. The SurfTab searches for available
devices. This process can take a moment. All available devices are then
displayed in a pop-up window.
e) Tap the device that you wish to connect to. The two devices now connect to
each other.
f) A short time later, the selected device will show the display of the SurfTab.
i
If your television device does not support Miracast technology, a "Miracast
dongle" can be used to connect the SurfTab via Miracast. In this case, you must
ensure that the selected dongle is compatible with both the SurfTab and your
television.