Operation Manual

7) Starting up the SurfTab for the first time

First unpack your SurfTab. Remove all components from the

packaging and completely remove the packaging material,

including the protective film. Check to ensure that the delivery is

complete (see Section 5). If you find that there are components

missing or damaged, contact customer service immediately.

Charging the SurfTab

Please fully charge your SurfTab before you use it for the first

time.

To charge the SurfTab, connect the USB 2.0 plug of the USB 2.0

cable provided to the power adapter and connect the Micro-USB

plug of the cable to the SurfTab. Now plug the power adapter

into a socket.

The charging Lade-LED flashes red while the device is

charging. Once the battery is fully charged, the charging LED is

permanently illuminated red.

NOTE

Only leave the power adapter connected to the power

socket until the tablet is fully charged. Once charged,

disconnect the power adapter from the socket first and then

remove the charging cable from your SurfTab.

NOTE

The maximum battery life is reached after approximately

10 charging cycles.

NOTE

We recommend to charge the SurfTab in the switched off

state. In this way you achieve the fastest possible download

speed.