Operation Manual

EN
15
2) First set up
2.1) Charging the SurfTab®
Before the first use, it is recommended to fully charge the SurfTab®. Connect
the DC input connector with the SurfTab® and connect the power supply
to an electrical outlet.
2.2) Getting started
A) After charging the SurfTab®, hold down the power button for
3-5 seconds to switch on the device.
B) After switching on the device, the start screen appears. To set the user
interface to the desired language, please tap inside the applications
menu on "SettingS" and afterwards on "Language & input".
Tap now in the right column on the first field "Language" and
select your language.
2.3) Connecting the Internet
With the SurfTab® you have the possibility to access the Internet via Wi-Fi.
If you want to establish a connection to a new network, please proceed
as follows:
A) Go via the applications menu to the settings and tap on "Wi-fi" under
"WireLeSS anD netWorkS". In case the Wi-Fi function is not activated yet,
first pull the on/off switch to "on".
B) On the right side all the wireless networks are displayed. Tap on your
preferred network and enter the password into the appropriate field.
C) The SurfTab® then connects with the Internet. Via the browser symbol
you can now surf the Internet as usual.
i
If you have once established a connection to a Wi-Fi network, the SurfTab®
automatically connects to it as soon as it is within reach.
i
To save power, it is advisable to turn off the wireless function, if you do
not need it.