Operation Manual

5) Controls and connections

A) Front camera

B) Speaker

C) Touch screen

D) Rear camera

E) Micro-USB socket /

Charging socket

F) Audio port

G) On/off switch

H) Volume control

I) Memory card slot

J) Microphone

6) Charging the SurfTab

Please fully charge your SurfTab before you use it for the first time. Connect your

SurfTab to a plug socket using the USB cable and power adapter. The SurfTab

is fully charged when the two-colour status LED turns yellow. Charging via a PC

generally take longer than charging via a plug socket.

The maximum battery life is reached after approximately ten charging cycles.

7) Switching on the SurfTab

After you have charged your SurfTab, you can switch it on. Press the on/off

switch for two to four seconds to start the device. As soon as the device is

switched on, the lock screen appears. Place your finger on the lock symbol on

the screen and drag the lock symbol to the right to the open lock. Your SurfTab

will now display the home screen.

If you are using your new SurfTab for the first time, a configuration assistant

will appear to help you configure the first important settings on your SurfTab.

The settings that you specify here (for example, language or WiFi) can be altered

again later on the applications menu under "SettingS".