Operation Manual

EN
19
Connecting another device via Bluetooth®
a) Select "SettingS" in the applications menu. You will find the "Bluetooth"
item in the menu column.
b) Slide the on/off switch for Bluetooth from "oFF" to "on".
c) Tap "
Bluetooth" with your fingertip.
d) Activate the Bluetooth function on the device you want to connect and
make the device visible to other Bluetooth devices, if necessary. To do so,
refer to the instructions in the operating manual of the device.
e) Tap "
SeaRch FoR deviceS" located at the top right of the screen. A list of all
available Bluetooth devices in the vicinity will appear.
f) Tap the device you want to connect. Then confirm by tapping "
PaiR".
g) You may also have to confirm pairing on the device you want to connect.
16) Activating standby mode
If you do not want to use your SurfTab for a while, press the on/off switch briefly
to put the SurfTab into standby mode and save power. To exit standby mode,
briefly press the on/off switch again.
Once you have reactivated the SurfTab, it will initially display the lock screen.
Place your finger on the lock symbol and drag it to the right to the open lock.
Your SurfTab will now display the home screen.
i
If you previously set up a screen lock, you must now identify yourself using the
method that you chose in order to unlock the SurfTab.
i
Standby mode is activated automatically when the SurfTab is not used for a certain
time. You can specify the period of time after which the SurfTab automatically goes
into standby mode under "SettingS" + "diSpLay" + "Screen time out".
17) Reset
If your SurfTab freezes and no longer responds, you can force a shutdown by
pressing and holding the on/off switch for approximately 10 seconds. Then you
can switch the SurfTab on again as usual.