Operation Manual

EN
14
d) To end the sound transmission, remove the transmitter from the USB port of your
computer. Turn on the SoundBox by briefly pressing the on/off switch ).
i
Existing radio connections may interfere with the wireless sound transmission to your
SoundBox. To eliminate this malfunction and establish an optimum connection between
the SoundBox and transmitter, change the transmission channel by pressing the Q or
R button on the transmitter. In the "FA Q" section, you can find further help and answers
to the most frequently asked questions.
3.2) Line-in music playback
You can use your SoundBox as a loudspeaker for your MP3 player or other audio sources,
such as your notebook (see Figure 5). To play back music with SoundBox via a line-in
connection, proceed as follows:
a) Connect the MP3 player or another audio source with your SoundBox by connect the
line-in cable included in delivery with the line-in jack of SoundBox. After that, insert
the line-in cable into the headphone jack or line-out jack of your MP3 player/the
audio source.
b) Turn on the SoundBox by briefly pressing the on/off switch
). As soon as the blue LED
on the on/off switch lights up, your SoundBox is ready for operation.
c) Start the playback of the desired music file on your MP3 player or another audio
source. The sound signal is now played back via your SoundBox.
i
SoundBox can be used on your computer without the transmitter only via the line-in input
of SoundBox.
4) Operation of TrekStor Wireless SoundBox
Activation/Deactivation of SoundBox
Turn on the SoundBox by briefly pressing the on/off switch
). As soon as the blue LED on
the on/off switch lights up, your SoundBox is ready for operation.
Turn off SoundBox by briefly pressing the on/off switch
). SoundBox is switched off as
soon as the blue LED extinguishes.
Adjusting the Volume
Press the
a or b button on the top of your SoundBox to raise or lower the volume.
You can also adjust the volume for music playback on your computer, MP3 player, or other
audio source.
Changing the Transmission Channel on the Transmitter
By pressing the
Q or R button on the transmitter, you can switch through the eight
defined channels until you find one without interference. In this way, you can establish an
optimum connection between your SoundBox and the transmitter.