Operation Manual

BB 4000

chan

e PIN?

BB 4000

enter PIN

2.7 Entering and modifying the PIN time –

energy-saving function

If the cycle computer, which is in sleep mode

with the PIN function active (PIN not equal to

0000), is not awakened over a certain period

of time, it can only be reactivated by entering

your PIN. This period of time (PIN time) can

be entered or modified in the "New PIN

time?" window: After you have pressed the

SET button, you will be requested to enter

your PIN. After making a correct entry, you

will be transferred to "PIN TIME", where you

can enter up to 240 min. The factory setting

is 60 min. In sleep mode, only the time will be

displayed until the PIN time elapses. After the

PIN time elapses, the time display will also be

faded out. If the PIN time is set to "0", this

energy-saving function is deactivated and the

time will be permanently displayed.

2.6 Entering and modifying the PIN – anti-theft protection

You can protect your cycle computer against foreign access

with a PIN. Activation of the cycle computer is only possible in

this case if the PIN is entered correctly. After adjusting the time

and date, the user is transferred to the "Change PIN?" window.

You can enter your own PIN here and subsequently modify it if

necessary. If you do not wish to use any PIN, press the MODE

button. Otherwise, after pressing the SET button, you will be

asked to enter the former PIN (the factory setting is "0000"). In

order to do this, press the MODE button until the appropriate

digit appears and subsequently jump to the next position by

pressing the SET button. The PIN is controlled. If the PIN has

been incorrectly entered, "Wrong PIN" appears for approx. 3

seconds and you will be requested to make a new entry. If the

PIN is correct, enter a new PIN of your choice as described

above. After confirming the last position by pressing the SET

button, the PIN must be re-entered. If repetition of the PIN is

incorrect, you will be returned to the "Change PIN?" window. If

you wish to dispense with safeguarding your cycle computer

with a PIN, reset the PIN to "0000".

Please note your personal PIN on page 2, so that you can have

it available if appropriate.