Operation Manual

28
BB 4000
bee
p
er on?
BB 4000BB 4000
Destination
BB 4000
Settin
g
s
Adjusting the remaining revolution counter
• Press the SET button for 3 seconds
• The display "Set revs." appears and the first
digit for entry flashes
• Adjust the remaining revolution counter by
pressing the MODE button repeatedly and
confirming the individual digits by pressing
the SET button
(De)activating the signal
• Press the SET button for 3 seconds
• The display "Signal on?" or "Signal off?" appears
• By pressing the SET button, the audible signal (on
exceeding or falling below the set training limits)
can be activated or deactivated
= Signal is activated
Entry of the upper and lower training limits of
the pedal frequency
• Press the SET button for 3 seconds
• The display "Signal on?" or "Signal off?"
appears
• By pressing the MODE button, "Set
min/max?" appears
• By pressing the SET button, select entry of the
values for "Maximum" and "Minimum"
• Entry of the digits as usual
• Confirm by pressing the SET button
5.7 Submenu "Destination" DEST
5.8 Submenu "Set" SET
Remaining cycling
time with reference
to the revolutions
still to be pedalled
and the pedal fre-
quency previously
measured
Current pedal fre-
quency
Remaining revoluti-
ons (countdown)
Upper limit of
pedal frequency
Current pedal fre-
quency
Lower limit of
pedal frequency
66