- Microsoft Word - BlueFlyers Manual

After the configuration options have been selected, the USB flash drive which will

be used to configure the BlueFlyers unit needs to be selected. Be sure the USB

flash drive is plugged into an available USB port on the PC. If a USB device is

found that contains the proper directory structure that is used by BlueFlyers, then

it will be shown as selected. A different device can still be chosen. To choose a

device, click on the drive that corresponds to the USB flash drive which will be

used to configure the BlueFlyers unit. The Save button will be disabled until a

device is selected. The files currently stored on the selected USB flash

drive’s /private, /public, and /radio directories will be overwritten with the

new configuration information.