User`s guide

Synology DiskStation User's Guide

Based on DSM 3.2

132 Chapter 14: Safeguard Your Environment with Surveillance Station

Use PTZ Control

If your camera has PTZ (pan/tilt/zoom) support, you can select a camera and use the Controller panel to adjust

the camera's direction. Clicking on the home button will restore the camera back to its original position. If you

have selected a camera with partial PTZ support, the unsupported functions on the Controller panel will be

grayed out.

Use Other Functions

On the Live View page, you can also use the following functions.

1 To digitally zoom in and out, drag the zoom bar or place the mouse over the live view of a selected camera

and then scroll the mouse. You can also zoom digitally by using the scroll button on your mouse, and move by

dragging the picture.

2 To adjust volume, drag the volume bar.

3 To see the corresponding preset or patrol, click on the Preset Position or Patrol list.

4 Click on Show information, and the status for each camera will be displayed on the corner of each live view

window.

5 To save the current image, click on the Snapshot button.

6 To start manual recording, click on the Manual Recording button.

7 To see the corresponding E-Map, click the E-Map button.

8 To see the live view in full screen mode, click the Full Screen button.

Note: Non-Internet Explorer browsers support limited functions only.