User`s guide

Synology DiskStation User's Guide
Based on DSM 3.2
154 Chapter 16: Perform Advanced Management Tasks
Enable SNMP Service
Go to Main Menu > Control Panel > SNMP to enable SNMP service, which allows users to monitor
Synology DiskStation network flow with the network management software.
Currently, SNMPv1 and SNMPv2c protocols are supported.
To enable SNMP service:
1 Tick Enable SNMP service and enter a Community name.
2 Enter the optional information to help you identify your Synology DiskStation: Name, Location, and Email.
3 Click OK.
To disable the SNMP service:
Uncheck Enable SNMP service, and click OK.
Enable Terminal Services
Go to Main Menu > Control Panel > Terminal to enable Terminal service, allowing you to use Telnet or SSH to
log in to Synology DiskStation and modify its settings.
To enable connection to Synology DiskStation via Telnet or SSH:
1 Do any of the following:
 If you want to enable the Telnet service, tick Enable Telnet service.
 If you want to enable the SSH service, tick Enable SSH service.
Note: When you disable the SSH service, all SSH tasks will be terminated immediately. If you disable the SSH
service while performing a backup task, perform the task again after the SSH service is disabled.