User`s guide

Synology DiskStation User's Guide
Based on DSM 3.2
93 Chapter 10: Host Websites, Email Server, and Print Server
5 Click Save and then click Close.
6 If you want to print a test page to make sure AirPrint is successfully enabled, choose USB Printer Manager >
Print Test Page.
Note:
 Enabling AirPrint will also enable DSM's Bonjour Printer Broadcast function.
 AirPrint is available for iOS 4.2 or onward only.
To enable Google Cloud Print support:
1 Select the printer from the device list.
2 Choose USB Printer Manager > Set Up Printer.
3 Tick Enable Google Cloud Print.
4 Enter your Google email address and password in the fields.
5 Choose your printer's brand and driver from the drop-down menus.
6 Click Save.
7 If you want to manage your printer(s) and print job(s), click the Google Cloud Print link.
8 Click Close.
9 If you want to print a test page to make sure Google Cloud Print is successfully enabled, choose USB Printer
Manager > Print Test Page.
To manage the printer:
1 Select the printer from the device list.
2 Do any of the following:
 Click Get Info to get the printer's information.
 Choose USB Printer Manager > Release Printer to release the connection between the printer and a client
(Network MFP mode only). After a client connects to the multifunctional printer to receive faxes and scan
files, the connection might last for a while and need to be released to allow the next client in line to connect
to the printer.
 Choose USB Printer Manager > Clean up spool space to cancel all printing jobs on all printers.
 Click Eject and disconnect the printer from the USB port of DiskStation.
Set up Computer to Access Print Server
After the print server is set up on your DiskStation, Windows, Mac, and Linux client over the local area network
can connect to the print server and access its print/fax/scan service.
To set up print server access with Windows:
1 Install and open Synology Assistant on your computer.
2 Click the Printer Device tab, click the Add button, and follow the wizard to complete the setup process. If you
cannot see the Printer Device tab, enable it by clicking the Settings button (with a gear icon) at the top-right
corner.
Note:
 Using Synology Assistant to set up print server access under the Network Printer mode is only available for
DiskStations running on DSM v2.0.1-3.0368 and onward.
 Using Synology Assistant to set up print server access under the Network MFP mode is only available for
DiskStations running on DSM v3.1-1553 and onward.
 For other methods of setting up print server access, open DSM Help, go to Main Menu > Control Panel >
External Devices, click the Help button (with a question mark) at the top-right corner, and then refer to the
Access Printer from Windows section.
To set up print server access with Mac OS X:
1 Make sure DSM’s Bonjour Printer Broadcast function is enabled. See "Manage Mac File Service" on Page 48
for more information.