Manualshelf

user manual

ManualsBrandsTRENDnet ManualsNetwork RouterNetwork Router 108Mbps High Speed 802.11g Wireless Access Point
11121314151617181920
11
1. Select the Encryption Key Length Size ranging from 64 to 128 Bits that you
would like to use. Select the Lifetime of the Encryption Key from 5 Minutes
to 1 Day. As soon as the lifetime of the Encryption Key is over, the Encryption
Key will be renewed by the Radius server.
2. Enter the IP address, the Port and the Shared Secret used by the Primary
Radius Server.
3. Enter the IP address, the Port and the Shared Secret used by the
Secondary Radius Server.
4. Click “Apply” button to take effect after Access Point reboots itself.
Note: As soon as WPA is enabled, all the wireless client stations that are
connect to the Access Point currently will be disconnected. The wireless clients
must be configured manually to authenticate themselves with the Radius server
to be reconnected.