user manual

16
11g mode only: User can use 11g only when he selects “enable”.
Super G mode: Super G mode is disabled by selecting “Disable” from the drop
list. If you like to use Super G to enhance the speed, there are three options on
Super G mode: Super G without turbo; Super G with Dynamic turbo and Super
G with Static turbo. Turbo mode indicates the combination of two channels to
enhance the throughput. Super G without turbo indicates that it is on Super G
mode without the channel’s combination. Dynamic turbo is able to
automatically detect if any ‘SuperG based’ product is available. If no, the
connection is via ‘normal’ G.. Static turbo means it will not go back to ‘normal’ G
once it starts.
Antenna Transmit Power: Adjust the power of the antenna transmission by
selecting from the dropping list.
Aging Interval: To limited STA connect timing.
3.5 Security
This page is where you configure the security features supported by this Access
Point.