user manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-812DRU
47
2. Click Connect to connect your computer to the scanner.
3. Once your computer is connected, you can receive scanned files from the scanner.
4. After you have finished printing, click Disconnect, to make the scanner available to
other computers on your network that use the scanner.
Router Maintenance & Monitoring
Reset your router to factory defaults
Administrator > Settings Management
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting. Before you reset your
router to defaults, if possible, you should backup your router configuration first, see
“
Backup and restore your router configuration settings” on page 48.
There are two methods that can be used to reset your router to factory defaults.
• Reset Button – Located on the side panel of your router, see “
Product Hardware
Features” on page 5. Use this method if you are encountering difficulties with
accessing your router management page.
OR
• Router Management Page
1. Log into your router management page (see “
Access your router management page”
on page 26).
2. Click on Administrator and click on Settings Management.
3. Under Load Factory Default, click Load Default. When prompted to confirm this
action, click OK.
Router Default Settings
Administrator User Name admin
Administrator Password admin
Router IP Address 192.168.10.1
Router Subnet Mask 255.255.255.0
DHCP Server IP Range 192.168.10.100-192.168.150
Wireless 2.4GHz Enabled
Wireless 2.4GHz Encryption Please refer to wireless sticker or
device label
Wireless 5Ghz Enabled
Wireless 5GHz Encryption Please refer to wireless sticker or
device label