Quick Installation Guide TDM-E400 TDM-C400
Table ofofContents Table Contents English ....................................................................................................... 1. Before You Start .................................................................................. 2. Hardware Installation .......................................................................... 3. Software Installation (TDM-C400 only) ............................................... 4. Configuring the ADSL Modem through Ethernet or USB connection ..
1. Before You Start Package Content TDM-E400/TDM-C400 CD-ROM (User's Guide) Quick Installation Guide 1 x RJ-45 Cat.5 Cable 1 x USB Cable (for TDM-C400 only) 1 x RJ-11 Telephone Cable Power Adapter (15V DC 1A) Installation Requirements ADSL/ADSL2/ADSL2+ service up and running on your telephone line.
Collect the following information from your ADSL2+ service provider VPI value: ______ VCI value: ______ Encapsulation type: □LLC/SNAP or □VC/MUX As well as: For PPPoA (RFC2364) or PPPoE (RFC2516) User Name: _______________________ Password: ________________________ Authentication method: □PAP or □CHAP Host or IP address: _________________ For Static or Fixed IP Connectin (RFC1483 or RFC1577) Host: ____________________________ Domain: __________________________ Gateway: _________________________ IP address:
2. Hardware Installation 1. Connect the RJ-11 cable. 2. Connect the RJ-45 cable (and/or connect the USB cable for TDM-C400 USB combo Model only). 3. Attach the power connector to the ADSL2+ ethernet router. 4. Allow the device 60 seconds to boot. Verify that the WAN and LAN LEDs are on.
3. Software Installation (TDM-C400 only) Note: For Windows 98/98SE applications, you may need the Windows 98/98SE CD ROM to complete the installation. Before starting the software setup process, close all Windows programs currently running on your PC. 1. The system automatically detects the new hardware when the USB cable is connected to your PC Click Cancel. (Windows 98/98SE) (Windows ME) (Windows 2000) (Windows XP) 2.
3. The “Welcome!” windows appears. Exit all Windows programs before continuing. Then, click on Next. 4. Please review the license agreement and click Accept to continue. 5. The USB Modem Setup Wizard will begin installing the software and indicates the progress of the installation. 6. If the installation wizard detects that the ADSL modem is not connected by USB, it prompts you to connect it in order to proceed.
7. A message will be displayed requiring you to reboot the system. Select “Yes, reboot the computer now” and then click Close. 8. After rebooting, the device will be installed. Please click Finish. 9. From Programs, go to TRENDnet DSL Modem and click on the DSL Status. 10. The “Physical Link” tab of the “TRENDnet DSL Modem” window (Control Panel) allows you to review the current state of the TRENDnet DSL Modem and connection. The State field will indicate that the TDM-C400 is “Connected”.
4. Configuring the ADSL Modem through Ethernet or USB connection Note: The DHCP server of the ADSL2+ modem router is enabled by default. Please configure your computer to automatically obtain an IP address from the ADSL2+ modem router’s DHCP Server. 1. Open your web browser, type http://192.168.1.254 in the Address bar, and press Enter. 2. Enter User name and Password, and then click OK. By default, User name: admin Password: admin 3.
4. The Quick Configuration table will appear requiring you to fill in the fields with the appropriate information provided by your Service Provider. 5. Then click the Submit button. 6. Click Admin in the Web Configuration screen. 7. Click Commit & Reboot. 8. Click Commit.
9. The browser will indicate that your changes have been committed successfully. 10. The Reboot Mode scroll by default is Reboot in the Commit & Reboot sub-session. 11. Click the Reboot button to reboot your ADSL2+ modem router. 12. Please wait 15 ~ 20 seconds for reboot to finish completely. Do not turn off the power or interrupt the rebooting of your ADSL2+ modem router. Your installation is now complete.
Troubleshooting Q1: POWER LED does not illuminate after the product is turned on. What should I do? A1: Verify that you are using the power cable provided with the device and that it is securely connected to the ADSL2+ modem and a wall socket/power strip. Q2: I am not sure what type of Internet broadband connection I have for my DSL connection. How do I find out? A2: You can contact your Internet Service Provider's (ISP) Customer Service or Technical Support Department for the correct information.
Q7. My PC cannot access the Internet. A7: Use the ping utility, described on page 174 of the UG, check whether your PC can communicate with the ADSL2+ Modem Router 's LAN IP address (by default 192.168.1.254). If it cannot, check the Ethernet cabling. If you statically assigned a private IP address to the computer, (not a registered public address), verify the following: 1. Check that the gateway IP address on the computer is your public IP address.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.