TEW-714TRU User’s Guide © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide Table of Contents Table of Contents Product Overview �������������������������������������������������������������������������������1 Setup Wizard ����������������������������������������������������������������������������������� 19 Package Contents ������������������������������������������������������������������������������ 1 Basic Network Status ���������������������������������������������������������������������� 26 Features ����������������������������������������������
TEW-714TRU User’s Guide Product Overview Product Overview Features TRENDnet’s N150 Wireless Travel Router, model TEW-714TRU, is a flexible travel router for on the go professionals. Router mode turns a wired Internet connection into a wireless network. Repeater and WISP modes leverage an existing wireless network. Connect a USB storage drive to share content across the wireless network. Quickly charge mobile devices with the convenient quick charge port.
TEW-714TRU User’s Guide Product Overview Front Panel Power Plugs LED Indicator US Plug USB Share Port Network Port USB Quick Charge Port Reset Button Reset Button LED Indicator Push and hold for 2 seconds to reset TEW-714TRU OFF Powered off or LED system boot up Blinking red System is not ready Blinking orange Looking for Internet connection Blinking Green WPS pairing in progress Solid Green Internet connection established Network Port Connects to hotel network or your laptop by network c
TEW-714TRU User’s Guide Product Overview Side View Product Preset Information Preset label on package Network ON/OFF Switch Network ON/ OFF Switch WPS Button WPS Network Mode Button Selection Switch ON Turn on TEW-714TRU network and file sharing services. OFF The network service is turned off. The USB Quick Charge Port will still work if TEW-714TRU is plugged in to a power source. Device label with preset information There are two preset product labels comes with the package.
TEW-714TRU User’s Guide General Setups General Setups Where to find setup information Reset Your Router The TEW-714TRU is a multi-functioning router and your best traveling partner. Depending on your location and Internet availability, you need to setup your TEW-714TRU to operate in different network mode from time to time. This section describes general network setups and how to access system configurations. For specific setup task, please go to the page directly.
TEW-714TRU User’s Guide General Setups Web Management This section shows you how to setup a connection with the TEW714TRU and how to login to the web management page. 1 Choose the power plug suitable to your traveling area. Slide in the power plug. Push it firmly until it clicks. Preset label on package 2 Switch the TEW-714TRU wireless router on and then plug into a wall socket. 3 Search for available wireless connections in your computer network settings.
TEW-714TRU User’s Guide 4 General Setups Open a web browser and enter http://TEW-714TRU to access the web administration page. If you have a static IP set on your PC, please open a web browser and enter http://192.168.10.1 The TEW-714TRU login page will appear. * Please reference the troubleshooting section if you are unable to access the administration web page.
TEW-714TRU User’s Guide Setup Wizards Setup Wizards Router Mode 2 Push the power button to the “ON“ position and the Network Mode button to “Router” position. 3 Plug TEW-714TRU into a wall socket. 1 Choose the power plug suitable to your traveling area. Slide in the power plug. Push it firmly until it clicks. © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide 4 Setup Wizards Search for available wireless connections in your computer network settings. The default SSID of TEW-714TRU is shown on the preset label and the device label. This is the SSID that you will need to connect to. When your computer prompts you for the wireless key, you can push the WPS button on TEW-714TRU to send the wireless key automatically, or you can enter the wireless key manually.
TEW-714TRU User’s Guide Setup Wizards WISP Mode 2 Push the power button to the “ON“ position and the Network Mode button to “WISP” position. 3 Plug TEW-714TRU into a wall socket. Choose the power plug suitable to your traveling area. Slide in the power plug. Push it firmly until it clicks.
TEW-714TRU User’s Guide 4 Setup Wizards Search for available wireless connections in your computer network settings. The default SSID of TEW-714TRU is shown on the preset label and the device label. This is the SSID that you will need to connect to. When your computer prompts you for the wireless key, you can push the WPS button on TEW-714TRU to send the wireless key automatically, or you can enter the wireless key manually.
TEW-714TRU User’s Guide 5 Open a web browser and enter http://TEW-714TRU to access the web administration page. Setup Wizards 6 Click on the Basic tab, then click the Wizard button to begin the WISP setup wizard. Read the description and then click on Next. 7 Choose Automatic Setup to automatically search for available wireless connections. Click Next. If you have a static IP set on your PC, please open a web browser and enter http://192.168.10.1 The TEW-714TRU login page will appear.
TEW-714TRU User’s Guide 8 Choose the wireless network you want to join in. Click Select on the row, then click Next Setup Wizards 9 Enter the Wi-Fi key for your wireless Internet connection, and then click Apply. 10 The TEW-714TRU will reboot and connect to the Internet. If you don’t see the wireless network you want to join, click Site Survey to search the network again. Or, you can skip this step and enter your network information manually. © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide Setup Wizards Repeater Mode 2 Push the power button to the “ON“ position and the Network Mode button to “Repeater” position. 3 Plug TEW-714TRU into a wall socket. S Choose the power plug suitable to your traveling area. Slide in the power plug. Push it firmly until it clicks. © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide 4 Setup with WPS button: If you have the right to enable the WPS pairing process on access point or router, you can copy the wireless settings by pushing WPS buttons in this step. Otherwise, skip this step and go to step 5 directly. Setup Wizards 5 Search for available wireless connections in your computer network settings. The default SSID of TEW-714TRU is shown on the preset label and the device label. This is the SSID that you will need to connect to.
TEW-714TRU User’s Guide Open a web browser and enter http://TEW-714TRU to access the web administration page. 6 If you have a static IP set on your PC, please open a web browser and enter http://192.168.10.1 The TEW-714TRU login page will appear. Setup Wizards 7 Click on the Basic tab, then click the Wizard button to begin the Repeater setup wizard. Read the description and then click on Next. 8 Choose Automatic Setup to automatically search for available wireless connections. Click Next.
TEW-714TRU User’s Guide 9 Choose the wireless network you want to join in. Click Select on the row, then click Next Setup Wizards 10 Enter the Wi-Fi key of your wireless Internet connection, and then click Apply. 11 The TEW-714TRU will reboot and connect to the Internet. If you don’t see the wireless network you want to join, click Site Survey to search the network again. Or, you can skip this step and enter your network information manually. © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide Locate Your Router Properly Locate Your Router Properly Wireless Performance Considerations There are a number of factors that can impact the range of wireless devices. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device.
TEW-714TRU User’s Guide System Configuration System configuration System Management and Default Settings If you have a brand new TEW-714TRU or if you just reset your TEW714TRU to factory defaults by pressing and holding the reset button for over 2 seconds while it is powered on, your TEW-714TRU has the following settings: Reset Button Preset label on package Management IP : Administrator name : Administrator password : Default SSID : Default SSID passphrase : 192.168.10.
TEW-714TRU User’s Guide System Configuration Setup Wizard The TEW-714TRU has three different setup wizards that switch based on the position of the network mode switch. To use the setup wizard in a certain network mode, push the power button to the “ON“ position and the Network Mode button to the mode you want. 2 Select DHCP and then click Next. 3 Click Apply to end the wizard. 4 The TEW-714TRU will reboot and connect to the Internet.
TEW-714TRU User’s Guide System Configuration Router mode - Static Mode (Fixed IP) 1 Click on the Basic tab and then click Wizard button to enter the Router setup wizard. Read the description and then click Next. 2 Select Static Mode and then click Next. 3 Enter your fixed IP address information.
TEW-714TRU User’s Guide 3 Click Apply to end the wizard. System Configuration Router mode - PPPoE If you have a timed ADSL service, you may need to configure PPPoE for network authentication. 4 1 Click the Basic tab and then click Wizard button to enter to Router setup wizard. Read the description and then click Next. 2 Select PPPoE (ADSL) and then click Next. The TEW-714TRU will reboot and connect to the Internet. © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide 3 System Configuration Enter your PPPoE account information. User Name : PPPoE account user name Password : PPPoE account password On Demand Mode: In this mode, TEW-714TRU will try to connect PPPoE service when the traffic is going to the Internet. It will drop the connection after a period of time if there’s no traffic going to the Internet. The time interval can be set in following text field. 0 means redial immediately if the connection was dropped.
TEW-714TRU User’s Guide System Configuration WISP mode 1 Click on the Basic tab and then click Wizard button to enter the WISP setup wizard. Read the description and click Next. 3 Choose the wireless network you want to join in. Click Select on the row, then click Next If you don’t see the wireless network you want to join, click Site Survey to search the network again. Or, you can skip this step and enter your network information manually.
TEW-714TRU User’s Guide 4 5 Enter the Wi-Fi key for your wireless Internet connection and then click Apply. The TEW-714TRU will reboot and connect to the Internet. System Configuration Repeater mode 1 Click the Basic tab and then click Wizard button to enter Repeater setup wizard. Read the description and then click Next. 2 Choose Automatic Setup to search for available wireless connections automatically. Click Next. You can choose Manual Setup to skip site survey.
TEW-714TRU User’s Guide 3 System Configuration 4 Enter the Wi-Fi key for your wireless Internet connection and then click Apply. 5 The TEW-714TRU will reboot and the router is setup properly Choose the wireless network you want to join. Click Select on the row, then click Next If you don’t see the wireless network you want to join, click Site Survey to search the network again. Or, you can skip this step and enter your network information manually. © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide System Configuration Basic Network Status Basic Wireless Network This page shows the TEW-714TRU’s basic information. The status is automatically updated every few seconds. Wireless Settings Set up your wireless name, channel and security settings in this page. Select the SSID you want to set up, change the value and then click Apply to commit the changes. Enabling security prevents any unauthorized wireless clients from connecting to your network.
TEW-714TRU User’s Guide Broadcast Radio Name Select Enable or Disable button. This is (SSID): the SSID broadcast feature. When this option is set to Enable, your wireless network name is broadcast to anyone within wireless signal range. When this is disabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. Network Mode : Choose between N only, G only, B only, BG mixed, or BGN mixed mode.
TEW-714TRU User’s Guide Default Key : You may choose one of your 4 different WEP keys from below Encryption Key 1-4 : You may enter four different WEP keys. Select a key type from the drop-down list. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange - alphanumeric characters) format.
TEW-714TRU User’s Guide WPS WPS is the simplest way to connect a wireless client to the TEW714TRU. You don’t have to select the encryption mode and fill in a long encryption passphrase every time you try to setup a wireless connection. You only need to press a button on both the wireless client and the TEW-714TRU, and the WPS will do the rest for you. System Configuration WPS Config Choose Enable or Disable and then click Apply to enable or disable WPS functionality. The default setup is enabled.
TEW-714TRU User’s Guide System Configuration File Sharing Access folder through web browser Simply plug in your flash drive to the File Share Port, and you can create an instant file sharing folder between your devices. File Share Port Plug in you flash device to the File Share Port © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide 3 Click on the Basic tab and then click USB Storage. Plug in your USB flash drive if you have not plugged it in yet. 2 The TEW-714TRU will recognize the USB storage in a couple of seconds. Reload your web page to access your files.
TEW-714TRU User’s Guide Access files through Windows file sharing (CIFS) System Configuration For OS X systems: 1 Open the Finder 2 Click Go > Connect to server or press command + K hot key 3 Enter smb:// followed by the TEW-714TRU host name in the directory field. The default host name is TEW-714TRU. With the default host name, please enter enter smb://tew-714tru (case insensitive). Then click Connect to connect to TEW-714TRU’s USB storage.
TEW-714TRU User’s Guide 4 Login with one of the user account, (The default administrator user name is “admin” and the password is printed on the preset label and the device label. Please reference “User Settings” on page 37 for more details on user account settings.) System Configuration More than one USB storage device 1 You can connect more than one USB storage device to the TEW714TRU File Share Port by expanding USB ports with a USB HUB.
TEW-714TRU User’s Guide Advanced Settings Advanced Settings Administrator Router Status This page shows the TEW-714TRU’s detailed working status Wireless Mode : This refers to the wireless operation mode, not the network mode. Band : Shows the wireless is working on N only, G only, B only, BG mixed, or BGN mixed mode. SSID : Service Set Identifier. This SSID is human readable and performs as ESSID to setup wireless groups. Channel Number : Radio channel was set to Auto or fixed number of channel.
TEW-714TRU User’s Guide Time Zone Setting The Time Zone Setting allows your TEW-714TRU maintain accurate system logs. NTP Settings Current Time : The time TEW-714TRU currently has. You can click Sync with host to synchronize the TEW-714TRU with your PC. Time Zone : Select the time zone of the you are currently in. The TEW-714TRU will set its time based on your selection. NTP Server : Specify a time server (NTP server) to synchronize with. (e.g. pool.ntp.
TEW-714TRU User’s Guide System Log This page allows users to view a running log of the TEW-714TRU’s events and activities. Advanced Settings Statistics This page allows users to view system performance with key statistic numbers. Clear : Click this button to clear up the log Refresh : Click this button to refresh the log © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide Advanced Settings User Settings There are 4 user accounts with 3 levels of privileges setup in the TEW714TRU. The account on first row is preset as the default administrator. It cannot be disabled and it’s privileges can not be changed. However, you can change the login user name and password for this account. Three other accounts are available for router access and file sharing. They are disabled by default.
TEW-714TRU User’s Guide System This page allows you to do basic system management, upgrade firmware, restart system and reload factory defaults. Advanced Settings Upgrade Firmware TRENDnet may periodically release firmware upgrades that might add features or fix problems associated with your TRENDnet model and version. To find out if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/ 1.
TEW-714TRU User’s Guide Advanced Settings Advanced Setups LAN Settings Primary DNS Server : Secondary DNS Server : Default Gateway : DHCP Lease Time : Primary DNS server address Secondary DNS server address Default route for TEW-714TRU How long the assigning IP will be valid Apply : Click this button to apply the change Cancel : Click this button to abandon the change Hostname : The host name is the name TEW-714TRU’s identity on a network.
TEW-714TRU User’s Guide Internet Settings Setup your Internet access with DHCP, fixed IP or PPPoE DHCP Enter the host name (optional) and click Apply.
TEW-714TRU User’s Guide Operation Mode : Keep Alive Mode: With this mode, TEW-714TRU will try to connect PPPoE service if the connection was dropped for a period of time. The time interval can be set in following text field. 0 means redial immediately if the connection was dropped. (default: 60 seconds) On Demand Mode: With this mode, TEW-714TRU will try to connect PPPoE service when the traffic is going to the Internet.
TEW-714TRU User’s Guide Advanced Settings IPv6 Settings The TEW-714TRU can perform IPv6 static routing. Enable IPv6 static routing and enter the routing information. LAN IP/Prefix : Specify LAN IPv6 address and its network size WAN IP/Prefix : Specify WAN IPv6 address and its network size Default Gateway : Default route from LAN to WAN © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide Advanced Settings Advanced Wireless Settings Channel Bandwidth : Select channel bandwidth for 1) Dynamic select 20 MHz and 40MHz bandwidth or 2) choose 20MHz channels only. 20/40 Coexistence : Enable or disable 20MHz coexist with 40MHz channel or not. MCS : Select different 802.11N Modulation and Coding Scheme (MCS) against particular wireless noise. Or, select auto letting TEW-714TRU select MCSs dynamically. © Copyright 2013 TRENDnet. All rights reserved.
TEW-714TRU User’s Guide Advanced Settings TX Power : Wireless signal transmission power. Set transmission power to appropriate value to avoid wireless interference. The default value is 100%. Valid settings are between 1 and 100 (%). Short Preamble : Select a short or long preamble. For optimum performance it is recommended to also configure the client device to the same preamble type. Short Slot : Enable Short Slot Time to increase performance if you do not have 802.
TEW-714TRU User’s Guide Troubleshooting Troubleshooting Situation: I enterd http://tew‐714tru but I am not able to access the unit. What should I do? Situation: I enterd http://192.168.10.1 but I am not able to access the unit. What should I do? Solution: Please enter the default IP address (192.168.10.1) to login. Solution: 1. Turn the TEW-714TRU’s switch on. 2. Reset the device to factory default settings by pushing the reset button for 2 seconds. 3.
TEW-714TRU User’s Guide FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TEW-714TRU User’s Guide Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, 2006/95/EC and 2009/125/EC.. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC, 2006/95/EC and 2009/125/ EC: EC No.
TEW-714TRU User’s Guide cs Česky [Czech] da Dansk [Danish] de Deutsch [German] et Eesti [Estonian] en English es Español [Spanish] Ελληνική [Greek] el Français [French] fr it Italiano [Italian] Latviski [Latvian] lv Lietuvių [Lithuanian] lt TRENDnet tímto prohlašuje, že tento TEW-714TRU je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES, 2006/95/ES, a 2009/125/ES.
TEW-714TRU User’s Guide Warranty Limited Warranty MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. • TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
TEW-714TRU User’s Guide © Copyright 2013 TRENDnet. All rights reserved.
