User`s guide

TEW-714TRU User’s Guide Setup Wizards

Setup with WPS buon: If you have the right to enable the WPS

pairing process on access point or router, you can copy the wireless

sengs by pushing WPS buons in this step. Otherwise, skip this

step and go to step 5 directly.

a) Push WPS buon on the access point for 2 seconds.

b) Push WPS buon on TEW-714TRU for 2 seconds.

c) The LED indicator will blink in green when proceed the pairing.

Aer pairing, if success, the TEW-714TRU will reboot. The LED

indicator will o for about a minute, then blink in amber, and

nally shows solid green. It means the repeater is setup properly.

Search for available wireless connecons in your computer network

sengs. The default SSID of TEW-714TRU is shown on the preset

label and the device label� This is the SSID that you will need to

connect to�

Preset label

on package

Device label

with preset informaon

Enter wireless key manually� The default wireless key can be found

on the preset label on the package or on the device label on the

boom of the TEW-714TRU.