Installation guide

Minimum Requirements

 TEW-715APO

 CD-ROM (User's Guide)

 Multi-Language Quick Installation Guide

 PoE injector

 Power cord

 Pole mounting clamp

 Grounding wire

 Computer with an Ethernet port and Web

Browser

 A network switch or router with an available

network LAN port

 2 x RJ-45 network cables

Note: The TEW-715APO does not support IEEE 802.3af. You must use the proprietary Power over

Ethernet injector that is supplied with the TEW-715APO.

Note:

1. The default IP address of the TEW-715APO is 192.168.10.100. To configure the TEW-715APO,

your network adapter must have an IP address within the 192.168.10.x subnet (e.g.

192.168.10.50). Please refer to the Appendix in the User's Guide for more information.

2. Disable any anti-virus and firewall programs before configuring the access point.

Package Contents

1. Before You Start

2. Hardware Configuration