User Manual

27
Mode Setting: To setting the AP operation mode for 802.11g only or
802.11b/802.11g mix mode
TX Rates: Select one of the wireless communications transfer rates, measured in
megabytes per second, based upon the speed of wireless adapters connected to the
WLAN.
Security
This page is where user configures the security features supported by this Access
Point.
Password: Allow user to change the new login password. Here are the necessary
steps:
1. Enter the new password in the “AP Password New:” field.
2. Enter the new password again in the “Confirm” field.
3. Click “Apply”
MAC Filter: MAC Filter function controls the MAC of the network devices that
are listed in this table for access authorization or denial. There have three choices:
 Disable MAC Filters
 Only allow PCs with MAC listed below to access device
 Only deny PCs with MAC listed below to access device