Quick Installation Guide TV-IP602WN 1.
Table of Contents English 1. Before You Start 2. Hardware Installation and Configuration 1 1 2 Troubleshooting Wireless Tips 8 9 Version 03.14.
1. Before You Start Package Contents ŸTV-IP602WN ŸCD-ROM (Utility and User’s Guide) ŸMulti-Language Quick Installation Guide Ÿ2 x 2dbi Detachable Antennas ŸNetwork Cable (1.5m/5ft.) ŸMounting Kit ŸPower Adapter (12V DC, 1.5A) System Requirements ŸA computer with a wired network adapter properly installed. ŸCD-ROM Drive ŸVGA Resolution: 800 x 600 or above ŸWeb Browser: Internet Explorer (6.0 or higher) ŸWireless Router (e.g.
2. Hardware Installation and Configuration Note: It is recommended that you configure the IP Camera from a wired computer. 1. Insert the Utility CD-ROM into your CD-ROM drive. 2. Click Run autorun.exe (Windows 7/Vista only). 3. Click Setup Wizard. 4. Click Next. Then follow the Setup Wizard instructions. 5. Click Close.
6. Double click on the SetupWizard icon on your desktop. 7. Connect the provided network cable from one of your Router's network ports to the Ethernet port on the IP Camera. 8. Connect the Power Adapter to the IP Camera and then to a power outlet. 9. Click Next. 10. Select the IP camera and click Next. Verify that the MAC address listed matches the MAC address on your IP camera. The MAC address is listed on the bottom of the TV-IP602WN . Click Re-Scan if no cameras are detected. 11.
13. If you would like to change the administrator password, click Change Password, enter a new password, retype the new password and then click Next. Leave Change Password unchecked if you do not wish to change the password. Note: 1. Setting a password prevents other users from accessing the TV-IP602WN's configuration. 2. It is recommended that you enter a new password. If you decide to change this setting, please write down the new password. 3. Password is limited to up to 8 characters. 14.
17. Click Next. 18. Please wait while the settings on your cameras are being saved. 19. Select By using wireless and then click Next. 20. Disconnect the RJ-45 cable. Verify that the LINK (RED) LED is lit and then click Next. Note: The TV-IP602WN will not work wirelessly until you disconnect the Ethernet cable from the back of the camera. 21. Please wait while the settings on your cameras are being saved.
22. Click on the following URL or click Link to open up the browser configuration. 23. Enter the User name and Password, and then click OK. By default: User Name: admin Password: admin 24. Right click on the information bar and select Install This Add-on for All Users on This Computer… (Internet Explorer 8) 25. Click Install. (Internet Explorer 8) 26. Right click on the information bar and select Install ActiveX Control (Internet Explorer 6/7). 27. Click Install (Internet Explorer 6/7).
28. Live Video will now appear. 29. Use the command icons to control the IP camera 30. Unplug the power adapter and disconnect the TV-IP602WN from your computer. Place the TV-IP602WN in your desired location. Please refer to the Wireless Tips section for optimal placement of the TV-IP602WN . 31. Plug the power adapter back into the TV-IP602WN . Your installation is complete 1.
Troubleshooting 1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should I do? 1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard . 2.
7. After I successfully configured the TV-IP602W to match my wireless network settings, I can not connect to the camera. 1. Verify that the wireless settings match your wireless network settings. 2. Verify in the wireless section of the browser configuration that the Enable Wireless option is checked. 3. Make sure to disconnect the Ethernet cable from the camera and verify that the LINK LED is blinking red. 4. Please refer to the Wireless tips section if you continue to have wireless connectivity problems.
Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
There are a number of other environmental factors that can impact the range of wireless devices. 1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose. 2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 3.
Copyright ©2011. All Rights Reserved. TRENDnet.
