User's Guide

TRENDnet User’s Guide

TWG-431BR

Basic Installation and Configuration

IMPORTANT NOTE: The default mode for the interfaces is 1 x LAN / 4 x WAN. In this

mode, NAT throughput/performance will have a performance limitation of 200Mbps per

WAN interface.

1. Connect a network cable from the Port 2 WAN1 of your router to your modem.

2. Connect a network cable from Port 1 (Active LAN) your router to your computer.

3. Connect the includes power adapter from a power outlet to your router power port

and push the Power On(-)/Off(o) switch into the On(-) position.

4. After you have the unit powered on and have connected your computer into the

Active LAN port, open your web browser and type the IP address of the router in the

address bar, then press Enter. The default IP address is 192.168.10.1.

5. Enter the User Name and Password, and the click OK. By default:

User Name: admin

Password: admin