User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
10
TRENDnet User’s Guide
TWG-431BR
Click Save at the bottom. Then click Reboot at the top right to commit the changes.
Change LAN IPv4 address settings
System > VLAN Setup > Network
Note: The default LAN interface IPv4 address settings is 192.168.10.1 / 255.255.255.0
and also assigned to LAN port 1 by default. If the LAN IPv4 address settings are modified,
you will need to log into the router management page with the new IPv4 address
settings. In the router configuration page, the LAN settings are set as VLAN1 settings.
Note: When changing the LAN IPv4 address, the DHCP server IP range does not change
automatically. DHCP server settings must be changed manually.
1. Log into your router management page (see “Access your router management page”
on page 7).
2. Click on System and click VLAN Setup.
3. Under the VLAN1 section, click Network.
• IP Address – Enter the new LAN IPv4 address. (e.g. 192.168.50.1)
• Netmask – Enter the new LAN IPv4 subnet mask. (e.g. 255.255.255.0)
Click Save at the bottom. Then click Reboot at the top right to commit the changes.