User's Guide

TRENDnet User’s Guide

TWG-431BR

Add static DHCP reservations

System > VLAN Setup > DHCP Server

1. Log into your router management page (see “Access your router management page”

on page 7).

2. Click on System and click VLAN Setup.

3. Under the VLAN1 section, click the drop-down list next to Network and click DHCP

Server.

4. In the Static IP Lease Setup, enter the parameters for the static DHCP reservation and

click Add to add the static DHCP reservation to the list.

Note: The network device or computer the reservation is created will need to release and

renew the IPv4 address settings in order to obtain the new IP address settings.

• Comment – Enter a description or name for the DHCP reservation. (e.g.

trendnetpc)

• IPv4-Address – Enter the IPv4 address to assign to the computer or network

device for the reservation. You can also click the drop-down list to select from

list o of network devices detected by the router through DHCP. (e.g.

192.168.50.150)

• MAC-Address – Enter the MAC (Media Access Control) address of the

computer or network device to assign to the reservation. You can also click the

drop-down list to select from a list of network devices detected by the router

that have been assigned IPv4 address settings through DHCP. (e.g.

AA:BB:CC:DD:EE:FF)

5. Click Save at the bottom. Then click Reboot at the top right to commit the changes.