User's Guide

TRENDnet User’s Guide

TWG-431BR

IPv6 settings

System > IPv6 Setup

IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the

number of available Internet public IP addresses due to the 128-bit IP address structure

versus IPv4 32-bit address structure. In addition, there are several integrated

enhancements compared to the most commonly used and well known IPv4 (Internet

Protocol Version 4) such as:

• Integrated IPsec – Better Security

• Integrated Quality of Service (QoS) – Lower latency for real-time applications

• Higher Efficiency of Routing – Less transmission overhead and smaller routing

tables

• Easier configuration of addressing

Note: In order to use IPv6 Internet connection settings, it is required that your ISP

provide you with the IPv6 service. Please contact your ISP for availability and more

information about the IPv6 service.

1. Log into your router management page (see “Access your router management page”

on page 7).

2. Click on System and click on IPv6 Setup.

3. Select Enable. Review the IPv6 Internet Connection settings and enter information

settings specified by your ISP.

Note: Please contact your ISP for IPv6 service availability.

Select the IPv6 WAN connection type provided by your ISP.

• Static IPv6

• Auto-configuration (SLAAC/DHCPv6)

• PPPoE

• Link-Local

• 6to4

• 6rd

4. Click Save at the bottom. Then click Reboot at the top right to commit the changes.