User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
30
TRENDnet User’s Guide
TWG-431BR
Destination Rule
• Self – If enabled, specifies the traffic destination is the router. If the origination of
the destination traffic is not the router and another device IP address, select
disabled.
• Destination Address/Mask – This is the destination IP address or device IP address
or network to filter. (ex: 192.168.10.0/24, 192.168.10.120/32)
• Source IP Group – Click the drop-down the select an IP address or IP address range
group. You can create predefined IP address groups under Advanced > IP Group.
• Destination Port – Enter the destination port for the IP filter. If you did not create
and select a port group, you can manually enter it here.
• Destination Port Group – Click the drop-down the select a predefined port or port
range group. You can create predefined port groups under Advanced > Port Group.
• Interface – Click the drop-down list to select the destination interface for the IP
filter.
4. Click Save at the bottom. Then click Reboot at the top right to commit the changes.