User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
37
TRENDnet User’s Guide
TWG-431BR
Connection Detect – Allows you to setup WAN link tracking by pinging Internet IP
addresses instead of physical link detection.
• Service – Selecting Enable enables connection detection by IP address.
• IP Address to Ping – Enter an Internet IP address to send ping requests used to
verify the Internet link status.
• Ping Interval – Click the drop-down list to set the time interval between
consecutive ping requests in seconds.
• Failure Count – Click the drop-down list to set the maximum number of failed ping
requests before interface status is considered to be down or failed.
4. Click Save at the bottom. Then click Reboot at the top right to commit the changes.