User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
46
TRENDnet User’s Guide
TWG-431BR
Setting up the PPTP VPN client (Windows)
Note: This procedure provides a basic example how to setup PPTP VPN and establish
connectivity using a Windows® 10 client computer. If you are using a different operating
system or mobile device, please refer to the user’s guide/manual of the third party
operating system or device on configuring PPTP VPN. The PPTP VPN settings must match
with the settings configured on the router.
1. Click the Start button and click the Settings icon.
Start Button Settings icon
2. Click Network & Internet.
3. Click VPN in the left panel.
4. Under VPN, click Add a VPN connection.
5. Click the VPN provider drop-down list and select Windows (built-in).
6. Enter a name in the Connection name field.
7. Enter the Internet WAN IP address, DNS, or dynamic DNS hostname of your router to
connect over the Internet. In the example below, the Internet WAN IP address of the
router is 10.10.10.10. In your router, you can check the WAN IP address under Status
> Overview, under WAN.
8. Click the VPN type drop-down list and select Point to Point Tunneling Protocol
(PPTP).
9. Click the Type of sign-in info drop-down list and select User name and password.