User's Guide

TRENDnet User’s Guide

TWG-431BR

11. Under Account Setup, enter the User Name and Password for the L2TP account.

(e.g. User1)

12. Under Routing Rule, enter the Local Subnet the remote L2TP VPN clients will be

allowed to access and click Add to add to the Routing Rule List. (e.g. 192.168.10.0/24)

Note: If you want allow L2TP VPN clients to access any local subnet, you can leave the

Local Subnet settings as 0.0.0.0/0 and click Add.

13. Click Save at the bottom. Then click Reboot at the top right to commit the changes.

Setting up the L2TP VPN client (Windows) with IPsec encryption (PSK)

Note: This procedure provides a basic example how to setup L2TP with IPsec VPN and

establish connectivity using a Windows® 10 client computer. If you are using a different

operating system or mobile device, please refer to the user’s guide/manual of the third

party operating system or device on configuring L2TP with IPsec VPN. The L2TP with

IPsec VPN settings must match with the settings configured on the router.

1. Click the Start button and click the Settings icon.

Start Button Settings icon

2. Click Network & Internet.

3. Click VPN in the left panel.

4. Under VPN, click Add a VPN connection.