User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
53
TRENDnet User’s Guide
TWG-431BR
6. For the Local ID Type, select IP Address.
7. In the Local Subnets field, enter the local LAN IP subnet. (e.g. 192.168.10.0/24).
You can add additional local subnets if needed. (e.g. 192.168.10.0/24,192.168.20.0/24)
8. For the Remote ID Type, select IP Address.
9. In the Remote Subnets field, enter the remote LAN IP subnet. (e.g. 192.168.100.0/24)
You can add additional local subnets if needed. (e.g.
192.168.100.0/24,192.168.120.0/24)
10. In the Remote Host field, enter the remote WAN1 IP. (e.g. 10.10.10.20) This can also
be a domain name (ex: dynamic DNS host name)
11. Enter the Pre-Shared Key (PSK) for the IPsec VPN tunnel. (e.g. 1234567890)
Based on the example, the network settings will be the following:
12. For the DPD setting, select Enable.