User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
55
TRENDnet User’s Guide
TWG-431BR
VPN Router B Configuration
1. Log into your router management page (see “Access your router management page”
on page 7).
2. Click on System and click IPsec Server Setup.
3. Under IPsec List, click Create New IPsec.
4. For the Service, select Enable.
5. Click the Mode drop-down list and select LAN-to-LAN.
6. For the Local ID Type, select IP Address.
7. In the Local Subnets field, enter the local LAN IP subnet. (e.g. 192.168.100.0/24).
You can add additional local subnets if needed. (e.g. 192.168.10.0/24,192.168.120.0/24)
8. For the Remote ID Type, select IP Address.
9. In the Remote Subnets field, enter the remote LAN IP subnet. (e.g. 192.168.10.0/24)
You can add additional local subnets if needed. (e.g.
192.168.10.0/24,192.168.20.0/24)
10. In the Remote Host field, enter the remote WAN1 IP. (e.g. 10.10.10.20) This can also
be a domain name (ex: dynamic DNS host name)
11. Enter the Pre-Shared Key (PSK) for the IPsec VPN tunnel. (e.g. 1234567890)