User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
64
TRENDnet User’s Guide
TWG-431BR
7. For the Service, select Enable and click Save at the bottom.
Note: Please note that the state of the high availability setup is set to Master by default.
8. In the Virtual IP Setup list, under VLAN1, click on Edit.
9. For the Service, select Enable.
10. Under Virtual IP Settings, for the Virtual IP, enter 192.168.10.1 and enter an 8
character password in the Password field.
11. Click Save at the bottom. Then click Reboot at the top right to commit the changes.