User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
65
TRENDnet User’s Guide
TWG-431BR
Router 2 Backup HA Configuration
1. Log into your router management page (see “Access your router management page”
on page 7).
2. Click System and click on WAN Setup and under DNS, enter the DNS1 and DNS2
server IP addresses to ensure DNS can be resolved for LAN/VLAN2 devices, then click
Save at the bottom.
3. Click System and click on VLAN Setup.
4. Under VLAN1 in the list, click on Network.
5. Change the IP Address to 192.168.10.2 and click Save at the bottom of the page.
6. Click on System and click on High Availability.
7. For the Service, select Enable. Under High Availability Setup, for the State, click
Backup and click Save at the bottom.
Note: Please note that the state of the high availability setup is set to Master by default.
The Virtual Router ID must be the same for all routers configured in the same high
availability cluster.
8. In the Virtual IP Setup list, under VLAN1, click on Edit.
9. For the Service, select Enable.