User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
71
TRENDnet User’s Guide
TWG-431BR
Console access
Using the includes RS-232 to RJ-45 console cable, you can access the router console
command line interface management through the console port for debugging and
troubleshooting if necessary.
You can access the command line interface management of router using the terminal
emulation program settings below.
Baud Rate (bps)
57600
Data Bits
8
Parity Bits
None
Stop Bits
1
Hardware Flow Control
Off
Router Default Settings
Administrator User Name
admin
Administrator Password
admin
Router IP Address
192.168.10.1
Router Subnet Mask
255.255.255.0
DHCP Server IP Range
192.168.10.101-192.168.199
Default WAN Mode
4 WAN (Ports 2-5) / 1 LAN (Port 1)
Reset your router to factory defaults
Maintenance > Profile Setting
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting.
There are two methods that can be used to reset your router to factory defaults.
• Reset Button – Located on the rear panel of your router, see “Product Hardware
Features”. Use this method if you are encountering difficulties with accessing
your router management page.
OR
• Router Management Page
1. Log into your router management page (see “Access your router management page”
on page 7).
2. Click on Maintenance, then click on Profile Setting.
3. Next to Reset to Factory Default, click Default. When prompted to confirm this action,
click OK.
4. Wait for the router to settings to factory default.