User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
73
TRENDnet User’s Guide
TWG-431BR
SNMP Settings
System > SNMP
The router also supports SNMP v1/2c/3 management and SNMP trap receivers. You can
configure the SNMP management settings following the steps below.
1. Log into your router management page (see “Access your router management page”
on page 7).
2. Click on System and click on Management.
3. Review the settings below.
4. Click Save at the bottom. Then click Reboot at the top right to commit the changes.