User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
74
TRENDnet User’s Guide
TWG-431BR
Check the router status information
Status > Overview
You may want to check the system information of your router firmware, CPU usage,
system time, uptime, LAN/VLAN interface information, and WAN interface information.
1. Log into your router management page (see “Access your router management page”
on page 7).
2. Click on Status and click on Overview.
• CPU Usage – The gauge displays the current CPU utilization.
• Session Log – The gauge displays the current memory utilization for the session
log.
• System Log – The gauge displays the current memory utilization for the system
log.
• Mode – Displays the current operation mode of the router
• System Name – Displays the current system name to the device. This can be
modified under System > Management.
• System Time – Displays the current router time.
• System Uptime – Displays how long the router has been running without any
interruptions or reboots.
• Firmware Version – Displays the current firmware version of the router.
• Firmware Date – Displays the firmware date.
• LAN MAC Address – Displays the LAN MAC address.
• DNS1 – Displays the primary DNS server used by the router.
• DNS2 – Displays the secondary DNS server used by the router.
• VLAN# – Displays the VLAN IP interface and total data transmitted and received.
If there is VLAN information displayed, the VLAN is currently enabled/active.
• WAN# - Displays the current WAN Mode, IP address, MAC address, default
gateway, and total bytes transmitted and received through the interface.