User's Guide

© Copyright 2019 TRENDnet. All Rights Reserved.
77
TRENDnet User’s Guide
TWG-431BR
Technical Specifications
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3ab
• IEEE 802.1Q
Device Interface
• 5 x Gigabit ports (Modes: 4 WAN ports / 1 LAN port or 1 WAN port / 4 LAN
ports)
• 1 x USB 3.0 port (Backup & Restore Configuration / Export Logging)
• 1 x RJ-45 console port
• Reset button
• LED indicators
• On/off switch
Performance
• NAT (LAN-to-WAN) throughput: 900Mbps*
• Routing performance: 900Mbps
• Maximum concurrent sessions: 50,000
• Maximum number of VLANs: 8 (ID: 1-4093)
• IPsec VPN (AES-256/SHA-256/LAN-to-LAN) throughput: 200Mbps
• SSL VPN Throughput (Blowfish/SHA-1/Bridge): 20Mbps
VPN
• SSL VPN Client-to-Site (Up to 30 tunnels)
• IPsec VPN Server / Site-to-Site (Up to 40 tunnels)
• PPTP/L2TP VPN Server (Up to 40 tunnels)
• L2TP with IPsec VPN Server (Up to 40 tunnels shared with L2TP)
• IPsec Encryption: 3DES, AES-128/192/256
• IPsec Authentication: MD5, SHA1, SHA256
• IPsec Key Exchange: IKE: Main Mode/Aggressive Mode, Pre-shared Key, DH
Groups 1/2/5/14
• IPsec Protocols: ESP, PFS DH Groups 1/2/5/14, DPD, Local/Remote ID: IP
Address, FQDN
• IPsec NAT Traversal
• SSL VPN Encryption: AES
• SSL VPN Certificate: RSA
• PPTP/L2TP Encryption: MPPE 40-bit, 128-bit, IPsec
• PPTP/L2TP Authentication: MS-CHAPv1/2
Networking
• WAN Modes: NAT, Classical Routing
• NAT Modes: NAT, PAT
• IPv4 WAN Modes: DHCP, Static IP, PPPoE, PPTP
• IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6), Link-Local,
PPPoE, 6to4, 6rd
• Routing: Static, RIPv2, OSPFv1/2, distribute RIPv2 over OSPFv1/2, routing
policies (Up to 20 entries)
• Inter-VLAN Routing (Up to 8 VLANs, 8 IP interfaces)
• DHCP Server/Relay
• Dynamic DNS: dyn.com, no-ip.com
• WAN Failover
• WAN Load Balancing: Assign weight by percentage or bandwidth, source IP
based, source & destination IP based, session based
• High Availability: Supports 1 active-passive cluster up to a total of 6 units (1
master + 5 standby)
• VPN passthrough: IPsec, PPTP, L2TP
Access Control
• MAC address filtering (Up to 64 entries)
• IP address filtering: TCP, UDP, ICMP (Up to 64 entries)
• Content filtering: URL (HTTP only), Keyword, P2P, IM (Up to 64 entries)