User's Guide

TRENDnet User’s Guide

TWG-431BR

Router Installation

Desktop Hardware Installation

The site where you install the hub stack may greatly affect its performance. When

installing, consider the following pointers:

Note: The router model may be different than the one shown in the example

illustrations.

• Install the Router in a fairly cool and dry place.

• Install the Router in a site free from strong electromagnetic field generators (such

as motors), vibration, dust, and direct exposure to sunlight.

• Leave at least 10cm of space at the front and rear of the hub for ventilation.

• Install the Router on a sturdy, level surface that can support its weight, or in an

EIA standard-size equipment rack. For information on rack installation, see the

next section, Rack Mounting.

• When installing the Router on a level surface, attach the rubber feet to the

bottom of each device. The rubber feet cushion the hub and protect the hub

case from scratching.

Rack Mount Hardware Installation

The router can be mounted in an EIA standard-size, 19-inch rack, which can be placed in

a wiring closet with other equipment. Attach the mounting brackets at the router’s

front panel (one on each side), and secure them with the provided screws.

Then, use screws provided with the equipment rack to mount each router in the rack.

Note: The look of the router may be different than what is actually displayed.