Assembly Instructions

Hardware List

Part List

Tool(s) required for assembly: Level

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Bar Table

Table Top

1 Pc.

Apron

4 Pcs.

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

M6x13

Head Cap Bolt

16 pcs. (+1 extra)

M4x16

Wood Screw

8 pcs. (+1 extra)

Carton is also needed for assembly.

PAGE 1
Bar Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Table Top 1 Pc. B. Apron 4 Pcs. Hardware List Small Hex Wrench 1 pc. Hex Wrench 1 pc. Carton is also needed for assembly. Tool(s) required for assembly: Level M6x13 Head Cap Bolt 16 pcs.
PAGE 2
Assembly Instructions 2/2 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future. STEP 1 Attach Legs (C) to Apron (B) with Head Cap Bolts, tightening the bolts only half way.
PAGE 3
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.