Installation & Assembly

ManualsBrandsTrent Austin Design ManualsCeiling LightsAriel 2-Light Kitchen Island Dome Pendant

PLEASE READ AND SAVE FOR FUTURE REFERENCE.

CAUTION

1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock.

2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If

you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.

3. WARNING: The outlet box must be capable of supporting at least 25 lb.

GENERAL

Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations

provided.

Bulbs Required (not included): 2 Medium Base 100 Watt Max. (for 2-Light Pulley Pendant)

3 Medium Base 100 Watt Max. (for 3-Light Pulley Pendant)

IMPORTANT: If you wish to change cord length,

loosen cord restraint located on the canopy with a

flathead screwdriver (not included). Adjust cord to

desired length by pulling cord up through canopy, tie a

knot in the cord and re-tighten cord restraint.

CAUTION: Do NOT overtighten cord restraint.

2-LIGHT PULLEY PENDANT

3-LIGHT PULLEY PENDANT

1. OUTLET BOX (not included)

2. MOUNTING PLATE

3. OUTLET BOX SCREWS and WASHERS

(pre-attached to outlet box)

4. BLACK SUPPLY WIRE (not included)

5. SMOOTH (or BLACK) FIXTURE LEAD WIRE

6. WHITE SUPPLY WIRE (not included)

7. RIBBED (or WHITE) FIXTURE LEAD WIRE

8. FIXTURE GROUND WIRE

9. SUPPLY GROUND WIRE (not included)

10. WIRE CONNECTORS

11. ANCHOR SCREWS

12. FIXTURE SCREWS and HEX NUTS

13. ANCHORS

14. GROUND SCREW (pre-attached)

15. CANOPY

16. DECORATIVE NUTS (pre-attached)

17. CORD RESTRAINTS (pre-attached)

18. CORDS (pre-attached)

19. PULLEY WHEELS (pre-attached)

20. FIXTURE

21. SOCKETS (pre-attached)

22. SOCKET RINGS (pre-attached)

23. SWITCHES (pre-attached)

24. SHADES

25. PULLEY WEIGHTS (pre-attached)

PENDANT

Summary of content (2 pages)

PAGE 1
PENDANT PLEASE READ AND SAVE FOR FUTURE REFERENCE. CAUTION 1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock. 2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician. 3. WARNING: The outlet box must be capable of supporting at least 25 lb.
PAGE 2
CARE & CLEANING: Initial care for finishes requires periodic cleaning with a soft cloth, dampened with water. A mild non-abrasive soap may be used along with a soft cloth and water if the fixture is very dirty. Particular care should be taken to avoid abrasive materials and strong cleaning agents as they will quickly destroy the protective coatings and subject the finish to oxidation and discoloration.