Datasheet

9
TP 715 ESD*/
TPH 715 ESD*
TP 715 ESD*/
TPH 715 ESD*
TP 707KK ESD/
TPH 707KK ESD
TP 715 ESD
TP 510K ESD
TP 715 ESD* TP 715 ESD*
TP 707 KK ESD
TPH 715 ESD* TPH 715 ESD*
TPH 707 KK ESD
1
2
3
1. Angle extension TP -K
Each standard TP-workbench may also be supplied as an angle
extension. Fitted to front angle of main bench. Stock sizes are shown.
2. Corner workbench TP KK
A corner workbench can be used with two TP/TP-K benches (with
one H-frame pair) to create a 90 deg. angle setup. This unit consists
of a worktop, two side frames and a leg in the middle. Load capacity
150 kg u.d.l. Front side 565 mm.
3. Corner workbench TPH KK
A corner workbench can be used with two TPH benches (with one
H-frame pair) to create a 90 deg. angle setup. This unit consists of a
worktop and all necessary components. Load capacity 150 kg u.d.l.
Front side 565 mm.
No. Code Worktop mm Load capacity*
1 TP 510K ESD 500 x 1000 150 kg
TP 712K ESD 700 x 1200 150 kg
2 TP 707 KK ESD 1100 x 1100 150 kg
TP 909 KK ESD 1300 x 1300 150 kg
3 TPH 707 KK ESD 1100 x 1100 150 kg
TPH 909 KK ESD 1300 x 1300 150 kg
angle extension TP-K/TP-KK
*) Workbench with one H-frame pair **)Load capacity 150 kg u.d.l.
565 mm